- This topic has 1 reply, 2 voices, and was last updated 10 years, 4 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
We just got an assembled an ISP emulator shield last week. I come in this morning to try it. I’m able to successfully load the ArduinoISP sketch. But when I try to program a chip, I get the error (verbose set):
Arduino: 1.0.5 (Linux), Board: "Arduino Duemilanove w/ ATmega328"
/home/james/.local/arduino/hardware/tools/avrdude -C/home/james/.local/arduino/hardware/tools/avrdude.conf -v -v -v -v -patmega328p -cstk500v1 -P/dev/ttyACM0 -b19200 -e -Ulock:w:0x3F:m -Uefuse:w:0x05:m -Uhfuse:w:0xDA:m -Ulfuse:w:0xFF:m
avrdude: Version 5.11, compiled on Sep 9 2011 at 16:00:41
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/home/james/.local/arduino/hardware/tools/avrdude.conf"
User configuration file is "/home/james/.avrduderc"
User configuration file does not exist or is not a regular file, skipping
Using Port : /dev/ttyACM0
Using Programmer : stk500v1
Overriding Baud Rate : 19200
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: Send: 0 [30] [20]
avrdude: ser_recv(): programmer is not responding
avrdude: stk500_recv(): programmer is not responding
avrdude done. Thank you.I’m using Arduino v1.0.5 and an Arduino Mega 2560 (from SainSmart). I’m programming an ATMEGA328P-PN in the socket with the Arduino board set to Arduino Duemilonove w/ ATmega328 and Programmer set to Arduino as ISP.
Interesting. First, make sure that you’ve overridden the auto-reset.
Second, there have been quite a few reports of the mega2560 having issues with the Arduino as ISP process.Here is a possible fix: https://code.google.com/p/mega-isp/issues/detail?id=30
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
