Using Eggbot with a CNC machine as 4th axis

Home › Evil Mad Scientist Forums › Egg-Bot › Using Eggbot with a CNC machine as 4th axis

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 25, 2015 at 4:48 pm #20484
    Bob2299
    Participant

    I recently built an X-carve CNC machine.  Being a former woodturner I can see some neat appllications for the CNC with a 4th axis for lathe rotation.  From what I have seen such additions are expensive.

    But…  An Eggbot might be capable of suppying the needed rotating hardware and with appropriate software its stepper motor might do the rotation job.  Much of the CNC software is capable of controlling the 4th axis stepper.

    I am not in a position to do anthing yet, but having both the X-carve and your Eggbot (mine is not the fancy new one) causes one to think abouta hybrid.

    Any thoughts or comments?

    Bob

    October 25, 2015 at 4:53 pm #22292
    Windell Oskay
    Keymaster

    We have thought about this previously in the context of using the EggBot as a rotary axis in a laser. (It should work but we haven’t gotten around to it– mainly for lack of actually needing to laser any round objects.)

    My main concern would be that the hardware isn’t designed to resist the force exerted by a cutting tool. The bearings are light duty, and there is some slop in the tailstock bushings. So, you might need to beef it up a bit, or machine equivalent fixtures on the X-carve.
    October 25, 2015 at 6:25 pm #22293
    Bob2299
    Participant

    Yes, I agree, you would need to have some holding device more like a drive spur or tailstock as used in a lathe, alternatively numerous very light cuts with the CNC router or spindle.

    Bob

    January 3, 2016 at 5:15 am #22294
    izambard
    Participant

    Mach 3 does support a 4th axis and the setup is quite simple. Basically all that is required is a forth stepper to provide the rotation and a chuck to secure the work piece.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.