Pen up and down motor not functioning

Home › Evil Mad Scientist Forums › AxiDraw › Pen up and down motor not functioning

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 17, 2018 at 10:49 pm #20688
    Remlaps
    Participant

    Hello,
    The function of “up and down” on my Axi draw V2 is not working, although the y and x axis seem to be fine.
    I have checked the connections of the wires, as well as my power source.
    I’m wondering is there any other troubleshooting that would be useful before I look into getting into replacing parts?
    Thanks!

    January 17, 2018 at 11:18 pm #23026
    Windell Oskay
    Keymaster

    If XY movement is working well but Z is not, and the cabling is good, then it is most likely the case that the servo motor itself has failed. Please contact our store directly ( http://shop.evilmadscientist.com/contact ) about a replacement and we’ll have some follow-up questions.

    October 31, 2023 at 8:42 pm #30793
    rodrigospinel
    Participant

    Hello, i´m having the same problem with my Axi draw v2. Somethimes only the xy movement works and the y movements stops.

    November 2, 2023 at 9:03 am #30797
    Windell Oskay
    Keymaster

    The cause, and solution, are the same. And if you’re still having trouble, do use the contact form.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • The topic ‘Pen up and down motor not functioning’ is closed to new replies.