A0 size with Axidraw V2

Home › Evil Mad Scientist Forums › AxiDraw › A0 size with Axidraw V2

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 3, 2020 at 7:20 am #28436
    Cam Nguyen
    Participant

    Hi all,

    Due to my axidraw was broken, so i rebuild my machine with A0 size and then i run it but not work and return error code as below:

    Warning: AxiDraw movement was limited by its physical range of motion. If everything else looks correct, you may have an issue with your document size, or you may have the wrong AxiDraw model selected in the Version tab. Contact technical support for help.

    So, anyone can help me resolve for this issue .

    Thank so much.
    Best regards,
    Ben

    July 3, 2020 at 8:45 am #28437
    Windell Oskay
    Keymaster

    You can edit the machine size definition in the axidraw_conf.py configuration file.

    July 4, 2020 at 7:20 am #28444
    Cam Nguyen
    Participant

    Thank you so much

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.