Aluminum Winch Dimensions

Home › Evil Mad Scientist Forums › Other kit and product support › Aluminum Winch Dimensions

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 30, 2022 at 5:34 pm #29855
    RobotGrrl
    Participant

    Hi there,

    Have a few questions about the winch upgrade kit (https://shop.evilmadscientist.com/productsmenu/755#):

    1) Is there a set screw for attaching it to a motor shaft? Couldn’t see from the photos if there is.

    2) What is the diameter of the center hole?

    The application in mind is to control two lines on a kite (87″ wingspan).

    Thanks!

    March 30, 2022 at 5:39 pm #29859
    Windell Oskay
    Keymaster

    Hey!

    Yes, there’s a set screw for attaching to a motor shaft; the bore is 5 mm (nominal). We can also sell these winch parts without the cord at lower cost.

    May 31, 2022 at 4:06 pm #29921
    RobotGrrl
    Participant

    Thanks Windell for that clarification! Sorry for the delay, didn’t receive any notification and wanted to check back on this. This is cool to hear and will see if the piece will work for this project.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.