ChronoDotClock

Home › Evil Mad Scientist Forums › LED Matrix Kits › ChronoDotClock

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • January 26, 2014 at 11:52 am #20315
    evil_one
    Participant

    Any help with extra LED lit in time numbers(digits).  Looks as if the lower row, eg the three dots of the base of the “1” are being repeated in the row above.  

    I get the same behavior with the none ChronoDot sketch
    Thanks for any help.
    Tim
    January 26, 2014 at 5:19 pm #21661
    evil_one
    Participant

    This seems to be common to all sketches.  Two row act identically (8 and 9).

    Tim
    January 26, 2014 at 5:27 pm #21662
    Windell Oskay
    Keymaster

    Can you please say what hardware you are using?

    January 27, 2014 at 7:48 am #21663
    evil_one
    Participant

    latest peggy 2.3

    Row 8 was dead, I think I have jumper-ed Row 9 resister to Row 8 transistor.  More later.
    January 27, 2014 at 9:37 pm #21664
    evil_one
    Participant

    My pin count was off, I now have the 10’th pin of the IC jumper-ed to R8 (also missed that the upper row of R’s were even numbered).

    Now all is well.  Thanks
    Tim
    January 28, 2014 at 12:21 am #21665
    Windell Oskay
    Keymaster

    Okay– sounds a little complicated, but I’m glad that you have it working. :)

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.