eggbot contributed and layers

[Windell Oskay]

For a photo, you will need to post it online and put the URL here. I suggest using http://imgur.com

Hatch Fill has difficulty with sharp inside corners. Try adjusting changing the spacing, try changing the Tolerance value, and try changing the minimum gap length. 

[Tatien3D]

I hope that it works!

[Tatien3D]

http://overpic.net/viewer.php?file=xq237yczog02ohs9lh0w.png

http://overpic.net/viewer.php?file=xkwtcq4fmko041kz6dx8m.jpg

The other post doesn´t works. Perhaps this!

[Tatien3D]

And this is the problem with hatch fill. I can´t delete the line that appears in the middle of her face

http://www.overpic.net/viewer.php?file=x9kowtpix7v3oa5jd1ak.jpg

[Windell Oskay]

For the StippleGen: Can you please show what the SVG file looks like in Inkscape, before you print it?  

The usual process is to 

1.  “Save Stipple File (SVG format)”

2. Open that file in Inkscape

3. Move the image (optional)

4. Print onto the object

Are you doing _anything else_ to the SVG file, that would cause it to do something different?

[Windell Oskay]

For the hatch fill, you can delete the extra lines. 

1. Edit > Select all

2. Object > Ungroup

3. Path > Break apart

4. Click on the individual lines that you want to remove, and delete them.

You will also likely be able to find some combination of the input parameters that will avoid creating the extra lines.

[Tatien3D]

About StippleGen I´m going to print somethin more..I´m not sure that I´m following the steps that you say. I´ll tell spu the final result.

I´m going to try your recomenddation about the hatch fill.

Thank you for all.

[Author]

Posts