Interactive LED coffee table — worked for years — now 4 LEDS on at all times…

[kaosguy]

Hi. I have an 8 unit Interactive LED system that I built into a coffee table.

It has worked fine for years, but now I have 4 LEDs that are constantly on.

Here is a photo:    http://s5.postimg.org/jxzpreqfb/20150311_074112.jpg

Something must have burned out.

Can you help me diagnose/repair?

Thanks.

Alan Wolf

• This topic was modified 6 years, 6 months ago by Windell Oskay.

[Lenore Edman]

The 5th LED in that group (D405, I think) is likely shorted out. Check the leads on the back to see if something has bent or caused a short there. If the short is above the PCB but under the LED, you’ll likely need to replace that LED. If the LED has burnt out and fused to cause a short, then replacing that LED is still the answer. There should have been a few extra LEDs in your kit.

[Author]

Posts