- This topic has 1 reply, 2 voices, and was last updated 11 years, 10 months ago by .
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi,
The lines (curves) that my eggbot produces are quite jagged, and not nearly as smooth as your photos show. It looks like the stepper motors operate alternately, so that curves are a mix of horizontal and vertical lines.
Any suggestions?
Andrew
The most likely cause of this kind of thing is if you have not yet adjusted the motor current.
Please see this section of our documentation, for how to adjust it:
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.
