Pen Servo dosen’t work

Home › Evil Mad Scientist Forums › Egg-Bot › Pen Servo dosen’t work

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 3, 2015 at 6:22 pm #20421
    BigAl
    Participant

    Hello,

    my name is Lothar and I live in Germany. I just get the Egg-Bot Deluxe Edition today via Wattergott.
    Everything works fine, but the Pen Servo doesn’t work. I tried a different servo, but also no reaction.
    What to do?
    January 3, 2015 at 6:42 pm #22051
    Windell Oskay
    Keymaster

    Make sure that you’re using the lowest 3 pins, and that you have the brown wire towards the outside. If it’s still not working, please contact our store directly by e-mail or the contact form.

    January 4, 2015 at 8:05 am #22052
    BigAl
    Participant

    Problem solved. 

    After removing the EBB Board from the Egg-Bot I found a bad ‘cold’ soldering joint on the GND servo connecting pin to the EBB.
    Redone the soldering and everything works fine.
    Love the Egg-Bot, real fun :-)
    January 4, 2015 at 11:41 pm #22053
    Windell Oskay
    Keymaster

    I’m *so sorry* about the problem on the board, and *so glad* that you were able to get it working.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.