Forum Replies Created
-
Posts
-
The discord link doesn’t work. I said the invite was invalid. I sent you a message through the contact form.
B
Sure.
Windows 10
Inscape 1.1
EBBv13_and_above EB Firmware Version 2.7.0
DIY eggbot with your EBBSorry, I wasn’t clear. I am using an DIY “eggbot” with your EBB. I realize that Linda is having a problem with the eggbot. The confusion comes from when you talked about using AxiDraw to troubleshoot her problems.
What I meant was the I printed the file you posted using the eggbot extensions in inkscape. (IT all made perfect sense to me when I wrote it but I can see that it can be confusing)
Yes, I would be happy to send you a file. I do have a file that always
generates errors. Let me know where to send it.B
I need to jump in here also. I have a new (a few weeks old) EBB that is having almost the same problem that Linda is describing. I get the same errors;
Unexepcted response from EBB.
Command: SM,13,-3,2
Response: 0
Unexepcted response from EBB.
Command: SM,11,-1,3
Response: 0
displayed when the print is done with some shift in the drawing in the X axis (egg motor movement). The shift is easily to spot. If I simply reprint the same print, it has moved in the X direction.
This seems to be happening mostly when I print files that do longer movements in the X direction like making 6 similar images around the egg. If I make only one of the images it works fine.
I’ve noticed this on more than one file that I have made or downloaded. I thought it was something I had wrong until I ran into the post.
If you ask me the same questions that you asked Linda, the answers are the same as far as versions. The one difference is that I use the eggbot extensions in inkscape, not the axidraw extensions (I thought they were for the axidraw machine).
I printed the test file you sent with the eggbot extensions with no errors.
