[David Root]

Thanks for all your help… sorry I was not clearer from the start… BTW… if you don’t mind giving a last bit of help… is the EBB firmware updater compatible with other boards… or does the fact it does not find mine really mean very little?

Thanks again for your help with this…

[David Root]

I ran the EBB firmware updater… nothing… the updater does not find the board… this board is one made by JJrobots… I don’t know if that will matter… the EBB firmware updater seems to be looking for the board on the correct com port… but fails to find anything… I disconnected everything from the EBB.. all that is hooked up is the Ardino and the EBB…

Any Ideas?

[David Root]

Thanks.. give me a little while… I will get back to you one way or the other…

[David Root]

Tried to run the installer again… also reloaded the eggbot software extension… both the 2.4 and the 2.7.1 versions (separately)… and I got nowhere with it… the 2.4 version gave me the long error report in my first post… and the 2.7.1 gives me the failed to connect… and the computer sees the eggbot… and the drivers seem to be correct in the device manager….

I also installed the 32bit version… after I got rid of the other… still nothing new.. even with the new cord..

Any ideas… I believe this has to be in the software… but I have no idea where to start… 

[David Root]

Thanks… I will try this

[David Root]

2.7.1, I was using 2.5… but I updated it after I posted, when I looked (I thought I was running the newest one)… and now I am just getting a “Failed to connect to EggBot. :(” error… so I am not sure what is happening.. thanks

Sorry for the slow reply.. 

[Author]

Posts