[hb]

Brian,

Success!! Thank you so very much for your help! I used the link you provided and moved it into my C:\ drive and that has worked perfectly now. Again thank you both very much, I am grateful!

Hannah

[hb]

No, I extracted the file and have followed the directions to open and run it. I have made sure to unplug and plug all cords back in. I have also attached the most recent update I received, as now it is different than the photo I previously attached.

https://photos.app.goo.gl/C7ec2evUwXZePQcm6

It looks like the update can’t even read that the Axidraw is plugged in now. When I go through Inkscape, it has no problem reading the Axidraw. By the way, I have made sure to close all programs that could communicate with the Axidraw during the update.

[hb]

Apologies for the confusion. I successfully updated the software but am having trouble updating the firmware for the Axidraw. The attached error message above is what I receive when attempting to update the firmware from 2.6.0 to 2.7.0.

[hb]

Thank you for the update, I look forward to seeing what you come up with!

[Author]

Posts