kclenden

Forum Replies Created

Viewing 1 post (of 1 total)
  • Author
    Posts
  • April 12, 2013 at 3:58 pm in reply to: Bulbdial Clock – Trouble with Red LEDs #21321
    kclenden
    Participant

    Thanks.  The problem was at LED6 where it connects to the blue circuit board.  For some reason, the solder was not adhering to the pad on the blue circuit board.  I removed the solder and cleaned the pad and re-soldered.  That solved the problem.

  • Author
    Posts
Viewing 1 post (of 1 total)