[redisca]

Hello! Is it possible to make a font in Inkscape in one line and edit the text it introduces. if you can do so, describe how to do it. Thank you.

[redisca]

“Use handwriting capture, to reproduce real human handwriting” how to do it?

[redisca]

using inkscape you can create a single-pass font. If so, how?

[redisca]

This is very very bad

[redisca]

«If you provide large volumes of text in an appropriate format» unless there is no convenient and fast tool that would translate the letters of the text in one way, and not in two. especially since we are talking about a large volume of text.

[redisca]

or there is no such possibility and AxiDraw v 2 can not write as a person large volumes of text ???????

[redisca]

tell me, please, how to make a font, in which the pen will make one pass, not the outline

[redisca]

The first option on the photo does not suit you. at approach it is visible, that there contours. you need to do it as in photo 2

[redisca]


[redisca]

Hello!!! There is here what kind of problem. Acquired XY plotter (Axi Draw v2) in order to write them a lot of synopses. But faced with this. When we open a pdf file with a summary in Inskape, when we print it, AxiDraw requires that we finish the object (this is in the “Outline” tab), but when we do this,
then Inskape encircles each letter so that at least two circuits are obtained. For example, the letter “O” has both an outer contour and an inner contour. And the plotter draws the pen not with the letter “O”, but with two contours! As we know, people do not write like that. A man is enough for one line! QUESTION!!! How to make Inscape do a contour not on both sides of a letter,
but by letter, i.e. The contour should go as it were “inside” the letter and it should be one! It’s like a pen written. Inskape has “Hershey Text” (the EXPANSION tab and then the DRAWING), which contains a path that follows the letter. And this circuit is one. But in “Text Hershey” there is no possibility of choosing the font that I need. YOU ARE WELCOME,
Help!!! How to draw a contour “on the letter”, so that the XY pen of the plotter would write like a person, and not draw out the outlines of the letters. Or can it be possible to print directly and MSWord? And can it be possible through other programs to realize our intention to write abstracts? Thank you

[Author]

Posts