snots

Forum Replies Created

Viewing 15 posts - 1 through 15 (of 17 total)
1 2
  • Author
    Posts
  • January 13, 2015 at 2:22 pm in reply to: Need help with Eggbot Graphic #22058
    snots
    Participant

    EggBot Control Extension 2.3.4.

    EEB Version_and Above_EB Firmware Version 2.0.1
    January 13, 2015 at 1:48 pm in reply to: Need help with Eggbot Graphic #22056
    snots
    Participant

    Then What is this?

    January 2, 2015 at 3:48 pm in reply to: Sending Eggbot to Home Position? #22050
    snots
    Participant

    Ok Thanks.

    January 1, 2015 at 11:43 pm in reply to: Home position slightly off #22048
    snots
    Participant

    Ok, Actually what I think it was is the pressure clam had the motor slightly pitched to the left. If I have it home then swivel the pressure clamp a bit it sets right. Think that was it.

    December 28, 2014 at 7:57 pm in reply to: Micro pens #22040
    snots
    Participant

    Nice. I bought my wife a set of 72 Coptic sketch markers. They blend beautifully. I just tried a stipple of Grace Kelly with a Prismacolor pen, and the resolution looks great compared to the Sharpie Ultra Fine. To bad they take forever to dry. Are these other pens perminant?

    December 28, 2014 at 7:33 pm in reply to: Micro pens #22038
    snots
    Participant

    That interesting. Can you send my a link?

    December 28, 2014 at 6:15 pm in reply to: Micro pens #22036
    snots
    Participant

    So what do you consider to be the best 005, or 01 to use with an EggBot Pro? I’m a bit of a perfectionist. Use to do CNC programming for WDW, and now do Computer 3D modeling, and rendering, ( I have attached a sample of my work ). I must say this EggBot Pro is beautifully thought out, and built. Cosmetically it looks great, and has a very solid build. Almost resembles a miniature CNC lathe. Are there any ball point type pens that work well?

    PhantomArm.jpg
    December 28, 2014 at 5:45 pm in reply to: Micro pens #22034
    snots
    Participant

    Ok thanks. Does Sharpie make a pen with a finer tip than the Ultra fine that dry’s fast?

    December 28, 2014 at 12:56 am in reply to: Got Eggbot Pro Won't connect to my Mac #22018
    snots
    Participant

    Yes, I had the motor power supply plugged into a switched outlet.

    December 26, 2014 at 4:22 pm in reply to: Pen leaving stray marks #22030
    snots
    Participant

    I made a completely different image with lots of fills, and it came out fine. Not sure what caused it, but like you say even the file on thingiverse has it to some degree. If I have anymore issues, I’ll let you know.

    December 26, 2014 at 1:04 pm in reply to: Pen leaving stray marks #22028
    snots
    Participant

    Ok, but you don’t think that it’s a hardware issue then?

    December 26, 2014 at 12:25 pm in reply to: Pen leaving stray marks #22026
    snots
    Participant

    Actually it doesn’t. The peach background color are just straight lines as the egg rotates, and they stop at the eye before the black outline is put in with another layer. So the pen is moving a bit as it forms the circle cutout for the peach background. I don’t understand why the other looks pretty good, and the right doesn’t look the same.

    December 25, 2014 at 9:55 pm in reply to: Pen leaving stray marks #22024
    snots
    Participant

    The red area around the right eye. It seems like it leaves a much wider peach colored line line around it versus the left eye. It’s better, but still not right. Wonder if it has something to do with the file?

    December 25, 2014 at 5:43 pm in reply to: Pen leaving stray marks #22022
    snots
    Participant

    Still some problem with the right eye. The moves seem to look ok. What do you suggest?

    December 25, 2014 at 5:38 pm in reply to: Pen leaving stray marks #22021
    snots
    Participant

    Ok, but why does one eye look good, and the other looks way off?

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 17 total)
1 2