[Uwe]

Well,

it turns out that this is the correct forum.
So I have an Eggbot Board from JJROBOTS VBersion 1
There is nothing installed so far.
If I plug in the USB port. the blue LED on the ESP is flashing one time.
I have found out that there is that EBBUpgraderGUI_v270 Software.
I cannot connect to the board.
Errormessage is saying:

Building a list of COM ports …
Found the following ports:

COM5
Testing port … no EBB found
Testing port COM5 … no EBB found
Click Exit (or click Start Upgrade again to update more EBBs)

There is no other program running which is occupying the USB port.
Do I need to equip the board with the driver Hardware first?

[Uwe]

Thanx for your effort.
I lately found out that I am a stupid person who posted the question on the wrong forum.

Cheers
Uwe

[Uwe]

BN: Arduino Zero (Native USB Port)
VID: 2341
PID: 804d
SN: 734DB5705150474746202020FF0C2741

[Uwe]

Yes – Just checking if the USB connection to the board is working

[Uwe]

Sorry to be not precise.

After installing the newest incscape version, it ssems that the usb connection to the eggbot boat is not working.

I gett in inkscape the errormessage:

Failed to connect to EggBot. :(

My next step is to start the adruino ide, where I can connect to the board, as an Arudino ZERO – Native USB Port.

My assumption is now that the PC software is working.
I can see that the USB connection is working, because I get the Serial Nuimber of the board back at a connection test.

Next thing in line is the board itself.
As power is connected properly, I assume that the program on the board is missing.

[Uwe]

OK,

have installed 1.02 of inkscape.
PC seems working.

But I get an errormessage, saying:

Failed to connect to EggBot. :(

On the Arduino IDE I get the connect to the board.
Maybe I need to load the eggbot sketch onto the board?
But I cannot find an INO file to load.

Cheers
Uwe

• This reply was modified 3 years, 12 months ago by Uwe.

[Uwe]

Inkscape 0.92, installed on Windows 10 Pro.

[Author]

Posts