zucky

Forum Replies Created

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • in reply to: Help Setting up an older Egg-bot basic #22345
    zucky
    Participant

    It is an egg, thanks for the link. So far if I set the scale for width to 200%. A little experimenting and I should be good. Thanks again for your help!

    in reply to: Help Setting up an older Egg-bot basic #22343
    zucky
    Participant

    Whoops, I installed the wrong version of eggbot control. I just installed 2.6.4 and IT WORKS!

    Now to work on why the EggBot seems to be compressing the width by half, odd.
    Thank you for your help.
    in reply to: Help Setting up an older Egg-bot basic #22341
    zucky
    Participant
    Okay, I reinstalled the latest EggBot control and here’s what I show for versions:
    OSx 10.11.2
    XQuartz 2.7.8 (xorg-server 1.16.4)
    Inkscape .91
    Eggbot 2.6.3
    The control now no longer works at all, just the long error message.
    in reply to: Help Setting up an older Egg-bot basic #22339
    zucky
    Participant

    Thank you for your help, I’ve had a bit of a change in environment since I last posted so here’s where I am currently.

    I updated the OS on the Mac to Yosemite – was that ever a process as my machine experienced some of the update problems. Anyway, after the update I reinstalled inkscape (yes .91, sorry about that) and the eggbot extensions (current). And then received the same errors, sigh.
    Just now I installed the EggBot software version 2.5.0 and that has changed the problem. When in inkscape if I manually move a motor or the pen it works… once. The second time I try and do anything I get the message “Unable to find an Eggbot on any serial port. :(” If I then unplug the UBS and plug it back in the bot will work, again once then error message.
    I have tested the EggBot with another laptop and it works fine (other than squishing everything on one axis, which I’m sure is some setting I need to calibrate but I haven’t gotten that far. So it looks like my issue lies with the USB posts on my current laptop. Should you have any other ideas please let me know and thank you for your help!
Viewing 4 posts - 1 through 4 (of 4 total)